| REPLACEABLE BOLT-IN LINER | Save time by easily replacing the AR400 steel wear plates on the MS1160 without needing to remove the rotor. |
| $0.00 |
| INTEGRATED PUSH BAR | When push comes to shove, the integrated push bar helps control |
| $0.00 |
| DIRECTIONAL FELLING HOOK | Built into the pusher bar, the directional felling hook will directionally control wayward trees, sprawling clumps and low hanging limbs. |
| $0.00 |
| ADJUSTABLE SKID SHOES | The two replaceable skid shoes allow the operator to adjust the cutting height for optimal clearing performance. |
| $0.00 |
| ROLL BACK TO FELL STANDING TREES | The MS1160’s frame is angled so that you can roll back the Brushy Mulcher, pulling back the pusher bar so that you can fully engage the mulching head. This allows the operator to use the mulching head to fell standing trees. |
| $0.00 |
| SPRING LOADED HOSE SUPPORT | Take full advantage of the forward curl and roll back of the MS1160 without risking expensive damage to the hoses. Unique to the Baumalight Brush Mulcher, the spring loaded hose support prevents the hoses from falling into harm’s way during forward curl. |
| $0.00 |
| ADJUSTABLE BELT TENSIONER | The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt. |
| $0.00 |
| ENHANCED OPERATOR VISIBILITY | The improved design of the MS1160 mulcher head now allows the operator better visibility to the area you are mulching. |
| $0.00 |
| BENT AXIS PISTON MOTORS ARE A STANDARD OPTION | Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. |
| $0.00 |
| 11000 SERIES MULCHER TOOTH | |
| $0.00 |
| CASE DRAIN – VENT TO ATMOSPHERE | To prevent pressure relief activation on the motor seal, the MS1160 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you |
| $0.00 |