The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24" Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10" above ground and 6" below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes. All Baumalight stump grinders are made in North America and sold through dealers so you always will have local support to service or support your stump grinder. Model No. | 1P24 | 3P24 | 3P34 | 3P40 |
---|
Recommended HP Size | 20-45 | 25-55 | 45-80 | 60-120 | Maximum Engine HP | 50 | 58 | 85 | 125 | Maximum PTO HP | 40 | 50 | 75 | 115 | Transmission | Hydrostatic only | Any | Any | Any | Hydraulic GPM | -- | 5–20 | 5–20 | 5–20 | Rotor Size | 24" | 24" | 34" | 34" | Number of Teeth | 34 | 34 | 54 | 54 | Tooth Part number | S1000 | S1000 | S1000 | S1000 | Tooth Construction | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in | Cutting Wheel Speed | 540 RPM | 810 RPM | 810 RPM | 1000 RPM | Cutting Height - Above Ground | 10" | 18" | 25" | 25" | Cutting Depth - Below Ground | 6" | 8" | 14" | 14" | Maximum Cutting Depth - Per Pass | 5" | 6" | 9" | 9" | Maximum Horizontal Cut | 22" | 22" | 32" | 32" | Swing Arc | 0° | 65° | 65° | 65° | Hub Torque | 803 Ft.-Lbs. | 803 Ft.-Lbs. | 803 Ft.-Lbs. | 1050 Ft.-Lbs. | Over Torque Protection | Slip clutch | Slip clutch | Slip clutch | Slip clutch | Hitch | Cat I | Cat I or II | Cat II | Cat II | Quick hitch compatibility | Yes | No | No | No | No. of Remotes Required - Hydraulic | 0 | 1 or 2 | 1 or 2 | 1 or 2 | Requires 12 Volt DC | No | No | No | No | Input Speed | 540 | 540 | 540 | 1000 | Unit Weight (Shipping) Lbs. | 350 | 920 | 1231 | 1280 | Width (Shipping) | 48" | 42" | 48" | 48" | Length (Shipping) | 48" | 49" | 54" | 54" |
|