|
The 3P34 PTO stump grinder is designed for tractors equipped with a 50–80 horse power motor allowing you to grind into stumps with a 34" Rotor carrying 54 replaceable carbide teeth. The rugged gear box takes up to 80 HP and develops 803 ft/lbs of stump destroying torque. Designed for Cat 2 3PH and 540 PTO this versatile stump grinder has a cutting depth of 25" above ground and 14" below ground. With direct drive from the engine, all the way through the heavy duty gear box to the teeth, a stump grinder on the PTO of a tractor is the most efficient way to use a stump grinder for lawn care or fence row clearing. | Model No. | 1P24 | 3P24 | 3P34 | 3P40 |
|---|
| Recommended HP Size | 20-45 | 25-55 | 45-80 | 60-120 | | Maximum Engine HP | 50 | 58 | 85 | 125 | | Maximum PTO HP | 40 | 50 | 75 | 115 | | Transmission | Hydrostatic only | Any | Any | Any | | Hydraulic GPM | -- | 5–20 | 5–20 | 5–20 | | Rotor Size | 24" | 24" | 34" | 34" | | Number of Teeth | 34 | 34 | 54 | 54 | | Tooth Part number | S1000 | S1000 | S1000 | S1000 | | Tooth Construction | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in | | Cutting Wheel Speed | 540 RPM | 810 RPM | 810 RPM | 1000 RPM | | Cutting Height - Above Ground | 10" | 18" | 25" | 25" | | Cutting Depth - Below Ground | 6" | 8" | 14" | 14" | | Maximum Cutting Depth - Per Pass | 5" | 6" | 9" | 9" | | Maximum Horizontal Cut | 22" | 22" | 32" | 32" | | Swing Arc | 0° | 65° | 65° | 65° | | Hub Torque | 803 Ft.-Lbs. | 803 Ft.-Lbs. | 803 Ft.-Lbs. | 1050 Ft.-Lbs. | | Over Torque Protection | Slip clutch | Slip clutch | Slip clutch | Slip clutch | | Hitch | Cat I | Cat I or II | Cat II | Cat II | | Quick hitch compatibility | Yes | No | No | No | | No. of Remotes Required - Hydraulic | 0 | 1 or 2 | 1 or 2 | 1 or 2 | | Requires 12 Volt DC | No | No | No | No | | Input Speed | 540 | 540 | 540 | 1000 | | Unit Weight (Shipping) Lbs. | 350 | 920 | 1231 | 1280 | | Width (Shipping) | 48" | 42" | 48" | 48" | | Length (Shipping) | 48" | 49" | 54" | 54" |
|