GO, The Celli fixed power harrow is made for low power tractors that work in deep soil and in orchards and vineyards. It prepares seedbeds, eliminates soil compacting and varies the degree of soil finishing according to specific needs All standard machines are supplied with low PTO position gearbox (to fit tractors with PTO height between 45 and 55 cm) except for model 250, supplied with high PTO position gearbox (to fit tractors with PTO height between 55 and 65 cm). Technical note The bar, provided on request, is adjusted with pins or screws. It can be set to several positions, modifying the distance from the tines and the work angle. This adjustment allows an adequate setting in all working conditions, thus minimizing power absorption.Technical specifications and standard equipment- Maximum Horsepower: 80 HP (59 KW)
- PTO: 540 rpm; 1-speed: 319 rpm
- Category 2 3-point hitch
- Swinging lower hitches
- Welded box frame
- Rear leveling roller, adjustment by pins
- 90x10x260 mm Tines: working depth about 26 cm
- Mobile side plates
- Drive shaft with shear bolt safety device
- Safety devices
|