DANUSER | 214102/21220-4/196074

DANUSER 214102/21220-4/196074

Request Quote

Hi, my name is

Invalid value

and I would like to get more information on this DANUSER 214102/21220-4/196074 .
I can be reached by email at

Invalid value

or by phone at

Invalid value

Part #:	214102/21220-4/196074
Mfg:	DANUSER
Category:	SKID STEER ATTACHMENTS
Sub-Category:	POST DRIVER WITH TILT SKID STEER
Industry:	CONSTRUCTION
Machine Size:	CATERPILLAR WITH 14 PIN WIRE HARNESS
Attachment Size:	T POST - 8" POST
List Price:	$14,677.00 (not including Freight)
Shipping:	$420.00
Inventory:	214102: 0 AFS / 0 QOH / 0 QOO / ISBF 21220-4: 0 AFS / 0 QOH / 0 QOO / 0 ISBF 196074: 5 AFS / 5 QOH / 1 QOO / 35 ISBF
HORNET POST DRIVER NO GRAPPLE WITH TILT NO ADDITIONAL WEIGHT ***WITH 8" DOMED DRIVING TOOL

Drive like a pro even on your own

The model T8-RR drives T-posts up to 8" diameter posts and pipes at 400-800 strikes/minute and compares to the 1,150 ft.-lb. energy class. The railroad tie flat driving tool allows the unit to drive railroad ties, posts, and pipes up to 12".

Hornet post drivers come standard with a flow control valve, allowing the post driver to run on vehicles with hydraulic flows up to 30 GPM. Tool-less quick change feature makes swapping driving tools without hammer or punch a breeze. An additional weight kit lets operators fine-tune driver weight to match vehicle operating capacity which can increase driving speed up to 50% faster than base unit.

Post Dimensions (inches)
T-post to 8"
Energy Class
1150 ft.-lb.
Maximum Strikes per Minute
800
Overall Length (inches)
27.4"
Overall Width (inches)
52.8"
Overall Height (inches)
48.8"
Machine Weight
2,176 lb.
Hydraulic Requirements
2,200 - 3,500 PSI; 13 - 30 GPM
Driving Tool Inside Diameter (inches)
8.27"
Driving Tool Shaft Diameter (inches)
3"
Mount
Skid-Steer Quick Attach (not for front end loaders)

Danuser 214100 Hornet T8-RR

DA216003 Post Pulling / Depth Gauge 84? Chain (Can Be Used For Pulling, Levelingm & As A Depth Gauge)
DA206101 Filled Nitrogen Bottle
DA206102 Nitrogen Gas Charging Kit
Drives T Posts – 8? Diameter Posts
Integrated Post Puller
High Abrasion Resistant Hoses & Fittings With 1/2? Flat Face Couplers

Danuser Hornet Post Drivers

• T-Posts • Tent Stakes • Pipe Fence • Sign Posts • Fence Posts • Railroad Ties • Median Dividers

Jackhammer style power cell offers controlled high-speed driving performance
Comes standard with a flow control valve. Our flow control valve allows us to run within a wider range of hydraulic requirements, including high flow machines, without accelerated wear on the breaker.
Additional weight kit option. Fine tune the weight of the driver to match the operating capacity of the vehicle. Increases driving speed up to 50% faster.
Tool-less driving tool quick change which means no hammer and punch needed to change driving tools.
Post holder with tie down locations for transporting posts/pipe.
No setup required, it’s ready to go to work.
1-Year Warranty.

Advantages

Driving tools are made thicker & stronger. This helps to prevent breaking during excessive use.
Tool-less driving tool quick change means no hammer & punch needed to change driving tools.
The Hornet comes with a filled nitrogen bottle, N2 charge kit, & chain with hook.
The Hornet has an adjustable weight kit option. Fine tune the weight of the driver to match the operating capacity of the vehicle. Increases driving speed up to 50% faster.
The flow control valve allows you to run within a wider range of hydraulic requirements, including high flow machines, without accelerated wear on the breaker.
Post holder with tie down locations for transporting post/pipe when needed.
High abrasion resistant hoses.
T-Post adapter that can be used with flat or domed driving tool.

Nitrogen Charged Post Drivers

Jackhammer style post drivers have a chamber that holds a volume of nitrogen gas. The nitrogen is necessary for the post driver to perform the up and down stroke of the piston. The PSI of the nitrogen is critical to the operation of the driver. While a change in pressure can happen during dramatic seasonal changes, other than a routine pressure inspection, you should not need to do anything to the driver.

What Type Of Maintenance Is Required?

In addition to greasing the single grease zerk every two hours of use, checking the nitrogen pressure as the operator’s manual recommends. A thorough inspection of this or any attachment is always a good idea.