The Quadsaw LRS 2402 wields four circular blades with carbide tipped teeth that are extremely sharp and provide a smooth cut of branches and limbs up to 21 cm (8.27”) in thickness. The circular saw has many uses, such as trimming back hedgerows or maintaining paths and roads in forest areas.
The saw is hydraulic driven and can be mounted on large and medium-sized vehicles, such as telehandlers, front-end loaders, tractors and excavators.
| Working width | 2.4 m | 7’10” |
| Saw blades with Widia teeth | 4 pcs: Ø 59.5 cm | 4 pcs: Ø 1’11" |
| Branch thickness | 0.5-21 cm | 0.20”-8.27” |
| Driving speed up to | 5 km/h | 3.11 mph |
| Blade speed | 3000-3200 rpm |
| Required hydraulic connections | 1 x double acting + 1 x drain |
| Minimum oil flow, 28 ccm motor | 85 l/min @ 150 bar | 22.5 gpm @ 2176 psi |
| Alternative oil flow, 19 ccm motor | 50 l/min @ 180 bar | 13.2 gpm @ 2611 psi |
| Weight | 239 kg | 527 lb |
| Blade diameter: 59.5 cm (1’11") |  Standard |
| Continuous duty motor | Standard |
| Carbide tipped blades | Standard |
| Belt stretcher | Standard |
| Power Band belt drive | Standard |
| Belt tension gauge | Standard |
| Anti-cavitation valve | Standard |
| Large smooth surface | Standard |
| Narrow body | Standard |
| Branch guider at each saw blade | Standard |
| 4 circular blades in a line | Standard |
| 7° angle allows overlap between the blades | Standard |
| Skid shoe (the saw avoids hitting the ground) | Standard |
| Pressure relief valve | Standard |
| Saw blades or rotor blades, 4 pieces | Standard |
