| Swing Dampening Brake | This simple design allows you to adjust the amount of tension on the chute when it is out of the ground. It prevents slapping of the chute when transporting the machine. Simply tighten or loosen the bolts to allow more or less tension. |
| $0.00 |
| Forklift/Hoist Slots | Easy moving. 6”x 4” x 3/8” Tube Steel Main Frame for the strongest built plow in the industry. |
| $0.00 |
| 90° Rear Pivot Swing | The rear pivot can swing 90° either side of center, and provides the tightest turning radius available. Massive 2” x 8” pivot pins ensure years of dependable service. |
| $0.00 |
| Fabric Tension Spring and 16” Diameter Fabric Plates | Simple, easy-to-adjust fabric tension spring allows for quick adjustment. 16” Diameter fabric plates prevent the fabric from telescoping over the plates during installation. |
| $0.00 |
| Spring Loader Coulter | Comes with hardened steel blade; cuts through tree roots and vegetation. |
| $0.00 |
| 1" Moleboard Knife | This is standard equipment. Stainless steel parts in key wear areas, and a specially designed fabric chute installs fabric in a tight consistent snag free manner. |
| $0.00 |
| Replaceable Hard Surface Plow Point | Designed to disrupt the soil upward for easier pulling and proper silt fence installation. |
| $0.00 |
| Cutting Coulter and Replaceable 2" wide Self-Sharpening Cutting Tooth | The cutting tooth can be bought at any dealer who sells replacement cutting teeth for excavators or skid loaders; it is not proprietary to "The Silt Fence Plow". The coulter cuts through tree roots, grass and other material that can hang up around the moleboard knife. |
| $0.00 |
| Difference between the 48" and 36" Fabric Chutes | A 36" chute is the most common height of silt fence installed. The 36" chute will install 36" tall and shorter fabric. The 48" chute will install 48" tall and shorter fabric. |
| $0.00 |