Filtered Equipment

Front Loader Split Top Grapple for loaders equipped with Euro/Global carrier. 77" wide with two upper grapples for handling a variety of materials.(NO HOSES OR COUPLERS SUPPLIED)

Front Loader Split Top Grapple for loaders equipped with Euro/Global carrier. 62" wide with two upper grapples for handling a variety of materials.(NO HOSES OR COUPLERS SUPPLIED)

Sub-compact tine Grapple 48" wide JD 200/300/400 mount (NO HOSES OR COUPLERS SUPPLIED)

Sub-compact Tine Grapple 48"" wide skid steer mount (NO HOSES OR COUPLERS SUPPLIED)

Compact Tine Grapple 48" wide with skid steer mount(NO HOSES OR COUPLERS SUPPLIED)

Compact TineGrapple 48" wide with John Deere 200/300/400 mount (NO HOSES OR COUPLERS SUPPLIED)

Electric GENERATION II Sub-Compact Grapple **SSL MOUNT** WEIGHT 247LBS

Electric GENERATION II Sub-Compact Grapple **JD MOUNT**(200X, 200CX, D120,H120, H130,D160, 220R).WEIGHT 240LBS

3-pt mounted PTO Driven Smooth Cut Stump Grinder. 26” Dia. Cutting wheel, carbide steel bolt in teeth. For Tractors of 22 – 50 hp w/cyl hoses 33 teeth

3-pt mounted PTO Driven Smooth Cut Stump Grinder. 36” Dia. Cutting wheel, carbide steel bolt in teeth. For Tractors of 45 – 100 hp w/ cyl & hoses 42 teeth

72" Manure fork with 10 forged crank tines. Skid steer mount

Manure / Silage fork 72-inches wide with 10-forged cranked tines. Interfaces with JD 400/500 series loaders.

66" Manure fork with 9 forged cranked tines. Skid steer mount

Manure / Silage fork 66-inches wide with 9-forged cranked tines. Interfaces with JD 400/500 series loaders.

Trailer mover designed for Mini skid steer with 2" receiver tube

72" HD solid bottom sweep action scrap bucket. Features 21" wide sweep clamps. Complete with hoses and flat-face couplers

Skid Steer Low-Profile Tine Grapple. Cylinder guards. Overall width 72". Tines 7 1/2" on center. "Connect under pressure" Flat-faced couplers.

Skid Steer Low-Profile Tine Grapple. Same as above, but with 78" overall width.

Skid Steer Low-Profile Tine Grapple. Same as above, but with 84" overall width.

50" Manure fork for sub-compact tractors. 7 straight tines of 1-1/8" alloy steel. Skid Steer Mount

60" Manure fork for sub-compact tractors. 8 straight tines of 1-1/8" alloy steel. Skid Steer Mount

Manure / sillage forks 50-inches wide. 7 - straight tines of 1-1/8" alloy steel. Integrated mount to interface with JD 200/300 series loaders, H120 /H130 /D120 (not compatible w/ 240,257.25,260,278.25)

Manure fork 60-inches in width. Features 8 -straight tines of 1-1/8" alloy steel. Interfaces with JD 400/500 / D160 /D170 /H160 /H165/ H180 loaders

72" Low Profile Tine Grapple with Euro/Global mount . Shipped with hoses less couplers

78" Low Profile Tine Grapple with Euro/Global mount . Shipped with hoses less couplers

84" Low Profile Tine Grapple with Euro/Global mount . Shipped less hoses & couplers

The HPD-16/22Q. Center Mount for Tractor 3-pt (Cat I/II). Manual Adjustment driver w/ stabilizer legs.

Center Mount for Tractor 3-pt (Cat. I/II). All Hydraulic Adjustment driver.

Center Mount for Tractor 3-pt (Cat. II). All Hydraulic Adjustment driver. Maximum post size 11” x 10’

2,000 Lb. Bolt-on Bucket Bale Spear (Bolt-in Forged Tine for use with tight center bales) Useable length 42". Bolt-together design ships UPS in one carton.

2,000 Lb. Clamp-on Bucket Bale Spear Uses chain and turnbuckle system. 42" long bolt-in forged tine for use with round bales. Bolt-together design ships in one carton UPS.

1,800 Lb. 3-pt. Bale Spear (Cat. I/II) (UPS-able) Main spear is 44” tapered forged spear for excellent penetration into the bale. With welded balance spears.

3,000 Lb. 3-pt. Bale Spear Double forged bale spear. All welded frame. Cat. I/II uses two 44” tapered spears for use with round bales. Quick Hitch compatible.

3-pt mounted hydraulically driven bale spin off for Cat. I / II size tractors. Requires 8-10 gpm of hydraulic flow. Tapered forged spear. 2,200 lb. capacity

Front Loader mounted hyd. driven bale spin off. Requires 8-10 gpm of hydraulic flow**MUST SPECIFY MOUNT**

Skid Steer Single Bale Spear. Rated at 2,200 lbs.Designed to Interface with Universal Q.A. Single tapered spear, useable length 42"

Skid Steer Triple Bale Spear. Rated at 3,000 lbs for handling large square bales. Triple spears have useable length of 26", spaced 26-1/2" apart.

Skid Steer Triple Bale Spear. Rated at 4,000 lbs for handling large square bales. Triple spears have useable length of 42", spaced 26-1/2" apart.

2,000 Lb. 3-pt. Hay Handler/Unroller for 4’ to 6’ Bales (Cat. I, II, II Quick Hitch, III Narrow) (Use 2.5” x 8” Hydraulic Cylinder only - Not Included) Quick Hitch compatible.

Cat. I Hydraulic Top Link Cylinder 2” x 8” (19-7/8” ctr. / ctr. closed) NO HOSES SUPPLIED

Top Link Hydraulic Cylinder Cat. II 3” x 10” (21-1/4” ctr. / ctr. closed) NO HOSES SUPPLIED

Interfaces w/Kubota LA1251, LA1301. LA1601 loaders equipped with semi-quick attach. Allows the use of skid steer type attachments (shipped less pins) Max Cap 3,525 lbs.

Front Loader Pallet Forks Rated at 4,000 lbs.**MUST SPECIFY MOUNT**

Interfaces w/JD 145/146/148/158 loaders with pin-on buckets retained by 1-1/8" pins, allowing the use of skid steer type attachments (shipped less pins) Max Cap. 3,000 lbs.

Interfaces w/ MF 232. 236. 832. 838 1032 loaders w/buckets retained by 1" pins. Allows the use of skid steer type attachments (shipped less pins) Max Cap 3,525 lbs.

Clamp-on Bucket Dual Bales Spear. Rated at 3,000 lbs. Uses single chain & turnbuckle system. Bolt-in spears have useable length of 42" (Spears must be inserted into Bale)

Clamp-On Bucket Pallet Forks - 2,000 lb. capacity. 42" useable tine length. Fits most loader buckets.

Clamp-On Bucket Pallet Forks - 1,000 lb. capacity. 35" useable tine length. Fits most loader buckets.

Clamp-on Bucket Triple Bale Spear for square bales. Rated at 4,000 lbs. Uses dual chain & turnbuckles. Bolt-in spears have length of 42".

Clamp-On Bucket Pallet Forks - 4,000 lb. capacity. 42"useable tine length. Fits most loader buckets.